HG Marble and Natural Stone Cement and Lime Film Remover MCLFILMREM

Directions for use: Read all precautions before using this product. Wear Eye Protection (saftey glasses) and rubber gloves. Remove any loose cement, grout and lime scale as much as possible by sweeping. Wet the surface to be cleaned. Dilute the product 1:10 with warm water (approx. 120 degrees F). Apply with a scrubbing brush and brush softly on the wet floor. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards. Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad. For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping. Coverage: 30-40 square metres per litre. Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Marble Cement and Lime Film Remover.