HG Hagesan Vinyl and Linoleum Gloss Coating HG388

Directions for use: Before applying clean the floor thoroughly and remove any old coats of wax or polish. HG Gloss Coating Remover is best used for this purpose. The floor should then be rinsed well and allowed to dry. Apply with a Non-Fluffy Cloth wrapped around a Floor Wiper or, on rough surfaces, use a Mohair Paint Roller. Always apply in one direction only, and do not rub. After approxiamately 40 minutes, the first coat will have dried and the second coat can then applied over it (preferably at right angles). The protective coat can be walked on after approximately 3 hours and will be fully hardened in 3 days. Coverage: Approximately 40 m² per litre per coat. As two coats are recommended 1 litre is sufficient for 20 m². Maintenance: Use plain cold or warm water to clean spills and stains. For general maintenance we recommed one cup (100ml) of HG Vinyl and Linoleum Clean and Shine in a bucket of water. To remove HG Vinyl and Linoleum Gloss Coating, use HG Gloss Coating Remover. Attention: To prevent foam, do not shake the bottle before use. This product cannot be used on marmoleum click flooring.