HG Hagesan Moisture Absorber HG100

More Information: The round absorbent granules used have a larger absorption surface area than the often-used flakes, while the round shape also creates more space between the granules, allowing more air (with moisture) to flow along the granules. Together with the granule basket, designed for maximum air contact, this results in a moisture absorber that is faster, works for a longer period of time and which can extract 1.5 times more moisture from the air than comparable systems. Depending on the relative humidity, a HG Moisture Absorber with 450 grams of absorbing granules is effective for 2 to 3 months in a room of 40 cubic metres. The handy pouring jug allows for easy disposal of the moisture collected. No more spills or stains! The double walled HG Granule Basket avoids contact with the granules, keeping your hands clean. Furthermore re-filling the granule basket is very easy too. Directions for use: Remove the lid from the granule basket. Take the bottle out of the wrapper. Press the upturned bottom of the granule basket down and secure by clicking it into the basket. Turn the lid off the bottle and remove the airtight seal, pour the granules out of the bottle into the granule basket. Place the lid of the granule basket back and put the granule basket back on the jug. Then place the HG Moisture Absorber where required. Attention: Check the granule basket once a month. If the granule basket is empty, empty the jug down the drain. To do this, take the granule basket off the jug, place it in the sink temporarily (take care not to spill any 'trapped' moisture because it may stain), empty the jug and replace the granule basket on the jug. Fill the granule basket with new granules and leave the HG Moisture Absorber to do its job. Carefully rinse the sink. Tip: Spilt liquid may stain. If this is the case, clean the stain immediately with lots of water and dab carefully. Repeat if necessary. Any stains can be removed with sodium sulphate (available from a chemist). Make a 5% solution in water (50 grams per litre) and sprinkle it on the stain. Leave to work for around 30 minutes. Then allow the water to evaporate with a hair dryer or electric heater. Vacuum any remaining powder. Avoid contact with leather and metal because these materials can be affected.