|
Cleaning Restoring and Protecting Solid Hotplates
Usage Instructions:
Cleaning prior to applying Hot Plate Restorer: Wait until hotplate is cool. Turn off electricity.
Using a damp, well soaped steel wool pad, run along the grain of the hotplate to remove any burnt on deposits.
Wipe over with a clean damp paper towel to remove any remaining cleaner.
Polishing: Make sure that the hotplates are completely dry. If you are unsure warm them up on a low heat, until they are dry.
Once the hotplate is cool, squeeze a very small amount of Easy-Do Sealed Hotplate Restorer onto the sponge applicator and following the grain of the hotplate apply an even coating.
Rub along the grain with a dry paper towel to remove any excess Easy-Do Sealed Hot Plate Restorer.
Switch on the hotplate to full power and allow to heat up for a few minutes during which time a small amount of smoke will be produced.
Switch off hotplate when the smoke has subsided.
|
|
 Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here
|
