|
De-Solv-It Universal Stain Remover and Pre-Wash - Usage Instructions
Usage Instructions:
+ Use can as upright as possible. Stains should be dealt with a soon as possible after they occur.
+ Try De-Solv-It Universal Stain Remover and Pre-Wash on unobtrusive area first for colourfastness and compatibility.
+ If using De-Solv-It Universal Stain Remover and Pre-Wash on skin/hair always wash thoroughly with soap/shampoo then rinse with water. Take care if you have sensitive skin.
+ De-Solv-it is a Pre-wash - do not apply to clothing whilst wearing.
+ Severe staining may require an additional application.
+ Do not use De-Solv-It Universal Stain Remover and Pre-Wash on leather, suede, silk foam/rubber backed carpets, porous hard surfaces such as untreated wood, khaki or fabrics with painted or appliqué designs.
(A) Washable Colourfast Clothing and Fabrics - Remove excess staining. Spray De-Solv-It Universal Stain Remover and Pre-Wash onto both sides of fabric and leave for 5 mins - 10 mins for bad stains.
Blot area with absorbent cloth. Re-spray area, leave for 1 min and wash item in accordance with manufacturers instructions using pre-wash cycle and highest recommended temperature.
(B) Furnishings and Non-Foam Backed Carpets - Remove excess staining. Spray De-Solv-It Universal Stain Remover and Pre-Wash onto a clean dry cloth. Blot stain, working towards centre. Wash area thoroughly with fabric/carpet shampoo. Rinse and dry.
(C) Hard Surfaces - De-Solv-It Universal Stain Remover and Pre-Wash can be sprayed directly and wiped off when stain loosened. Wash surface with warm detergent solution. Rinse and dry.
Note: Chewing Gum, Wet Gloss Paint, Tar and Shoe Polish - Remove as much as possible BEFORE proceeding to A or B above.
For large areas or stubborn stains, it is always better to apply several applications of De-Solv-It Universal Stain Remover and Pre-Wash SPARINGLY before completing A or B.
|
|
 Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here
|
