PLEASE NOTE: This product has been re-branded by the manufacturer as HG Natural Stone Protective Coating Gloss Finish.
HG Hagesan Marble and Natural Stone Shine Finish provides a thin self-shining protective coating on marble floors and other natural stone. This means that the pores are completely sealed. Dirt does not stand a chance.
HG Marble and Natural Stone Shine Finish deepens the colour and veining on marbles and other natural stones, whilst preventing stains, scratching and stubborn dirt. HG Marble and Natural Stone Shine Finish is also alcohol-resistant.
Viewing this content on a mobile device? Tap here to call us and order.
Quantity:
Enter e-mail address to tell a friend about this product
* How our offers work - when you tick the box to take advantage of one of our offers the offer will be applied once for each unit ordered.
To take advantage of an offer tick the box (all offers are based on buying 1 unit at full price). For example if the offer is for 3 more additional units and you tick the box and you have a quantity of 3 - you will be ordering 3 x 4 (1 unit at full price and 3 additional units at the offer price) = 12 units.
If you have any queries please call us on 01733 241960.
Underfloor heating should be switched off 12 hours before treatment with HG Marble and Natural Stone Shine Finish.
Apply by hand: Dilute HG Marble Shine Finish with equal part of clean water. Apply HG Natural Stone Shine Finish with a wax applicator or Non-Fluffy Cloth., spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat.
It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally.
Apply by polishing machine: Dilute HG Natural Stone Shine Finish with equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with machine fitted with felt or white synthetic pad, and polish at 300 rpm.
Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.
Attention: Do not stir or shake the bottle before use. Do not apply HG Marble and Natural Stone Shine Finish on surfaces to be treated with HG Marble Protector