HG Hagesan Cement Mortar and Efflorescence Remover (HG Limex) (HGP12) 1 Litre Ref: HGP12 HG Hagesan Cement Mortar and Efflorescence Remover cleans off stubborn cement film, mortar residues and white salt deposits (efflorescence) from ceramic and porcelain tiles, flagstones, terracotta, quarry tiles, victorian tiles, brick, concrete and any other non-calcareous (acid resistant) natural stone such as Norwegian Slate and some types of Granite. HG Hagesan Cement Mortar and Efflorescence Remover is especially suitable for porous and rough textured floors and walls. IMPORTANT: DO NOT apply HG Cement Mortar and Efflorescence Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, several types of (non-acid resistant) slate, terrazzo, granito, basaslt and cement tiles. Use HG Natural Stone Cement and Lime Film Remover. If in doubt test on an inconspicuous area first or use HG Hagesan Natural Stone Cement and Lime Film Remover. When using HG Cement Mortar and Efflorescence Remover we recommend using Eye Protection and an Odour Respirator (for poorly vented areas) as well as protective gloves. It is recommended to use HG Hagesan Tile Cleaner on floors when cleaning for the first time to remove the very last remains of cement after using HG Hagesan Cement and Mortar and Efflorescence Remover. Coverage: 1 litre is enough for a surface area of approx. 20 to 40 m². 1 Litre Also available in 5 Litre Size Click HERE Click here to download Safety Data Sheet (pdf). Click here to save 10% and buy in case size   Price:    £9.50 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product
HG Hagesan Cement Mortar and Efflorescence Remover (HG Limex) (HGP12) Usage Instructions Directions for use: *Efflorescence is caused by soluble salts in building materials, or soluble salts transferred into building materials by water, being drawn towards a drying surface by the movement of water. At the surface of the building material the water responsible for the transportation of the salts evaporates leaving behind the salts as a surface deposit. Dilution: Depending on the degree of residues dilute HG Hagesan Cement Mortar and Efflorescence Remover from 1:4 to 1:10 with water. Directions for use: Try HG Cement Mortar and Efflorescence Remover on a small inconspicuous area first. Wet the surface down with clean water before using. Then apply and spread the diluted HG Cement Mortar and Efflorescence Remover with a scrubbing brush or pad. Leave to work for a couple of minutes. Scrub thoroughly till clean then rinse off with plenty of water. Repeat treatment with HG Cement Mortar and Efflorescence Remover if necessary. Coverage: 1 litre is enough for a surface area of approx. 20 to 40 m². Attention: DO NOT apply HG Cement Mortar and Efflorescence Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, slate, terazzo, granito, basaslt and cement tiles. Use HG Hagesan Marble and Natural Stone Cement and Lime Film Remover. The use of HG Hagesan Cement, Mortar and Efflorescense Remover (HG Limex) may lighten the colour of the grout/cement. HG Hagesan Cement Mortar and Efflorescence Remover Product Information: Characteristics: Highly concentrated cleaning agent Density: ± 1.07 g/ml pH: < 1.0 Components: Hydrochloric Acid, Tensides, Solvents and Water. Precautions: R34 - Causes burns. R37 - Irritating to respiratory system. S1/2 - Keep locked up and out of the reach of children. S25 - Avoid contact with eyes. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and Eye Protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S64 -If swallowed, rinse mouth with water (only if the person is conscious). Caution: Do not use HG Cement Mortar and Efflorescence Remover in combination with other products, hazardous gasses (chlorine) could be released.
	Safety Goggles Ref: 306614 Standard Safety Goggles for eye protection. Fits all sizes and shapes, even fitting over most eye glasses. Soft vinyl moulds to the contours of your face. Adjustable elastic strap. Ventilated non-fogging lenses. Meets all current safety legislation.   Price:    £1.98 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product
	Vitrex Paint and Odour Respirator Mask Ref: 404974 Protects lungs against fine non-toxic particles, with breathe-easy valve for extra comfort. Charcoal filter provides relief from household odours and irritants (i.e. for brush and roller application of most domestic cleaning materials, paint and varnish) Universal fitment with elastic straps.   Price:    £5.24 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here