Protective Coating Satin Finish (Satin Gloss Polish) 5 Litre

Homecare Essentials > HG Hagesan Cleaning Products
> Complete Alphabetical HG Hagesan Product List > HG Hagesan Products PO-Q > Protective Coating Satin Finish (Satin Gloss Polish) 5 Litre

HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) 5 Litre (HGP14) Ref: HGP14-5

HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) (Product 14)

HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) is an easily applicable liquid polymer emulsion for all types of floor tiles (including unglazed quarry tiles and victorian tiles), flagstones and slate.

For Natural Stone see our HG Natural Stone Products.

When dry, this emulsion forms a glossy, super-thin yet extremely strong protective film, which protects tiles against stains, dirt, scratches and wear. HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) also enhances the colour and structure of the tile.

HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) also gives an anti-skid effect.

Maintain floors treated with HG Protective Coating Satin Finish (Satin Gloss Polish) with HG (Shine Cleaner) Shine Restoring Tile Cleaner (HGP17).

Coverage: 40 m² per litre per layer . Two coats (recommended) 20 m² per litre.

5 Litre 1 Litre size also available CLICK HERE

Click here to download Safety Data Sheet (pdf).

Click here to save 10% and buy HG Protective Coating Satin Finish in case size

Price: £47.50 Including VAT at 20%

Viewing this content on a mobile device? Tap here to call us and order.

Quantity:

Enter e-mail address to tell a friend about this product

HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) 5 Litre - Usage Instructions

Directions for use:

1. Prior to applying HG Protective Coating Satin Finish the floor must be completely clean and free of grease and dust.

To clean off grout residues, cement film and lime deposits use HG Cement Grout Film Remover (HG Extra) HGP11.

For intensive cleaning to remove grease, wax, dirt or old polish use HG Power Cleaner (Polish, Wax and Dirt Remover) HGP19.

After wet cleaning, the floor should be left to dry thoroughly for 3 days. With floor heating 24 hours. Turn off your floor heating 12 hours before treatment.

2. On new floors the glue/cement and grouting must be completely hardened and dry. The drying time is usually 4-6 weeks.

3. Existing porous surfaces such as slate, brick or flagstones first use HG Impregnating Protector (HGP13) .

4. To avoid foam, do not stir or shake the bottle before use. HG Protective Coating Satin Finish should be applied with a wax applicator or a Non-Fluffy Cloth wrapped around a Floor Wiper.

On rough surfaces, use a Mohair Paint Roller.

5. Pour some HG Protective Coating Satin Finish onto the floor and spread it in straight tracks in one direction. Do not rub or buff.

6. Once the HG Protective Coating Satin Finish has dried after approx. 40 minutes a second coat should be applied at right angles to the first.

7. The floor can be walked on about 3 hours after the final treatment but allow three days for the HG Protective Coating Satin Finish to become fully hardened and water resistant.

Maintenance: With HG (Shine Cleaner) Shine Restoring Tile Cleaner (HGP17). To strip off old coats of HG Protective Coating Satin Finish annually use HG Power Cleaner (Polish, Wax and Dirt Remover) HGP19 .

TIP: For regular maintenance of the protective film we advise mopping the floor once a month with a solution of 50ml (half a cup) of HG Protective Coating Satin Finish in half a bucket (5litre) of water.

In walkways where the protective film is more liable to wear, a new protective film can be quickly and easily applied over the existing layer, when necessary. In such cases first clean the floor using HG (Shine Cleaner) Shine Restoring Tile Cleaner (HGP17).

To strip off old coats of HG Protective Coating Satin Finish when refreshing the layer no longer has the desired effect use HG Power Cleaner (Polish, Wax and Dirt Remover) HGP19.

Coverage: 40 m² per litre per layer . Two coats (recommended) 20 m² per litre.

Attention: This product should be used indoors only, but not in rooms that can be wet, such as bathrooms.

Non-Fluffy Cloths Ref: 760872

Non-Fluffy Cloths

Non-Fluffy 100% Cotton Tea Cloths. These are pre-washed (and so ready to use) and are ideal for the application of a number of HG Hagesan Products.

When using these cloths we recommed using our 7 inch Roller Tray to hold the product.

Pack of 2. Colour may vary.

Size approx. 23 x 14.5in

Price: £2.14 Including VAT at 20%

Viewing this content on a mobile device? Tap here to call us and order.

Quantity:

Enter e-mail address to tell a friend about this product

Floor Wiper Ref: 372926A

Floor Wiper

Floor Wiper which can be used with our Non-Fluffy Cloths for the application of a number of HG Hagesan products.

Screw together handle.

Price: £6.14 Including VAT at 20%

Viewing this content on a mobile device? Tap here to call us and order.

Quantity:

Enter e-mail address to tell a friend about this product

* How our offers work - when you tick the box to take advantage of one of our offers the offer will be applied once for each unit ordered.

To take advantage of an offer tick the box (all offers are based on buying 1 unit at full price). For example if the offer is for 3 more additional units and you tick the box and you have a quantity of 3 - you will be ordering 3 x 4 (1 unit at full price and 3 additional units at the offer price) = 12 units.

If you have any queries please call us on 01733 241960.

**sRecentPrefix**

<br/><br/>
<div class="recenththeader">
<input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();">
<input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();">
<div style="text-align:center">Recently Viewed</div>
</div>
<br clear="all"/>
<table id="recenthtitem">

**sRecentImageRowPrefix**

**sRecentImageItem**

**sRecentImageRowSuffix**

</tr>

**sRecentDescRowPrefix**

<tr>

**sRecentDescItem**

**sRecentDescRowSuffix**

**sRecentPriceRowPrefix**

<tr>

**sRecentPriceItem**

<td class="recenthtitemprice">_PRICE_</td>