HG Hagesan Marble and Natural Stone Protective Coating Gloss Finish Ref: MARBLSHINE HG Marble and Natural Stone Protective Coating Gloss Finish (Product 33) HG Hagesan Marble and Natural Stone Protective Coating Gloss Finish provides a thin self-shining protective coating on marble floors and other natural stone. This means that the pores are completely sealed. Dirt does not stand a chance. HG Hagesan Marble and Natural Stone Protective Coating Gloss Finish deepens the colour and veining on marbles and other natural stones, whilst preventing stains, scratching and stubborn dirt. HG Marble and Natural Stone Shine Finish is also alcohol-resistant. Prior to applying HG Hagesan Marble and Natural Stone Protective Coating Gloss Finish , the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover. Fo regular maintenance use HG Marble and Natural Stone Wash and Shine. To strip old coats of Marble Shine Finish use HG Marble and Natural Stone Stripper. Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor. 1 Litre Click here to see the complete HG Marble Care Range. Click here to download Safety Data Sheet (pdf). Click here to save 10% and buy in case size   Price:    £13.79 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product Related products: 1. HG Marble and Natural Stone Cement and Lime Film Remover 1L (Ref: MCLFILMREM) 2. Non-Fluffy Cloths (Ref: 760872)
HG Hagesan Marble and Natural Stone Protective Coating Gloss Finish Usage Instructions Directions for use: Prior to applying HG Marble and Natural Stone Protective Coating Gloss Finish the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover. Allow the floor to dry for 3 days, in case of floor heating, 24 hours. Underfloor heating should be switched off 12 hours before treatment with HG Marble and Natural Stone Protective Coating Gloss Finish. Apply by hand: Dilute HG Marble and Natural Stone Protective Coating Gloss Finish with equal part of clean water. Apply HG Marble and Natural Stone Protective Coating Gloss Finish with a wax applicator or Non-Fluffy Cloth., spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat. It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally. Apply by polishing machine: Dilute HG Marble and Natural Stone Protective Coating Gloss Finish with equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with machine fitted with felt or white synthetic pad, and polish at 300 rpm. Regular maintenance: Use HG Marble and Natural Stone Wash and Shine. To strip old coats of HG Marble and Natural Stone Shine Finish use HG Marble and Natural Stone Stripper. Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor. Attention: Do not stir or shake the bottle before use. Do not apply HG Marble and Natural Stone Protective Coating Gloss Finish on surfaces to be treated with HG Marble Protector

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here