HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) is an easily applicable liquid polymer emulsion for all types of floor tiles (including unglazed quarry tiles and victorian tiles), flagstones and slate.
For Natural Stone see our HG Natural Stone Products.
When dry, this emulsion forms a glossy, super-thin yet extremely strong protective film, which protects tiles against stains, dirt, scratches and wear. HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) also enhances the colour and structure of the tile.
HG Hagesan Protective Coating Satin Finish (Satin Gloss Polish) also gives an anti-skid effect.
Viewing this content on a mobile device? Tap here to call us and order.
Quantity:
Enter e-mail address to tell a friend about this product
* How our offers work - when you tick the box to take advantage of one of our offers the offer will be applied once for each unit ordered.
To take advantage of an offer tick the box (all offers are based on buying 1 unit at full price). For example if the offer is for 3 more additional units and you tick the box and you have a quantity of 3 - you will be ordering 3 x 4 (1 unit at full price and 3 additional units at the offer price) = 12 units.
If you have any queries please call us on 01733 241960.
After wet cleaning, the floor should be left to dry thoroughly for 3 days. With floor heating 24 hours. Turn off your floor heating 12 hours before treatment.
2. On new floors the glue/cement and grouting must be completely hardened and dry. The drying time is usually 4-6 weeks.
4. To avoid foam, do not stir or shake the bottle before use. HG Protective Coating Satin Finish should be applied with a wax applicator or a Non-Fluffy Cloth wrapped around a Floor Wiper.
5. Pour some HG Protective Coating Satin Finish onto the floor and spread it in straight tracks in one direction. Do not rub or buff.
6. Once the HG Protective Coating Satin Finish has dried after approx. 40 minutes a second coat should be applied at right angles to the first.
7. The floor can be walked on about 3 hours after the final treatment but allow three days for the HG Protective Coating Satin Finish to become fully hardened and water resistant.
TIP: For regular maintenance of the protective film we advise mopping the floor once a month with a solution of 50ml (half a cup) of HG Protective Coating Satin Finish in half a bucket (5litre) of water.
In walkways where the protective film is more liable to wear, a new protective film can be quickly and easily applied over the existing layer, when necessary. In such cases first clean the floor using HG (Shine Cleaner) Shine Restoring Tile Cleaner (HGP17).
Floor Wiper which can be used with our Non-Fluffy Cloths for the application of a number of HG Hagesan products.
Screw together handle.
Price:
£6.14
Including
VAT at 20%
Viewing this content on a mobile device? Tap here to call us and order.
Quantity:
Enter e-mail address to tell a friend about this product
* How our offers work - when you tick the box to take advantage of one of our offers the offer will be applied once for each unit ordered.
To take advantage of an offer tick the box (all offers are based on buying 1 unit at full price). For example if the offer is for 3 more additional units and you tick the box and you have a quantity of 3 - you will be ordering 3 x 4 (1 unit at full price and 3 additional units at the offer price) = 12 units.
If you have any queries please call us on 01733 241960.
Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here