Shine Restoring Tile Cleaner (Shine Cleaner) - 5 Litre Ref: SUPERFLOOR5 Shine Restoring Tile Cleaner (Shine Cleaner) Shine Restoring Tile Cleaner (Shine Cleaner) is a fresh scented wash and shine cleaner for glazed and unglazed quarry tiles, ceramic floor tiles and natural stone. Shine Restoring Tile Cleaner (Shine Cleaner) gives all types of tile and stone floors a finish to be proud of. The fresh scented sheen finish of Shine Restoring Tile Cleaner (Shine Cleaner) enhances the colour of the floor and actually helps protect against stubborn dirt making cleaning easier. Shine Restoring Tile Cleaner (Shine Cleaner) not build up as the sheen finish is renewed with each wash. HG Hagesan Superfloor Shine Cleaner is ideal for floors where HG (Satin Gloss Polish) Protective Coating Satin Finish (HGP14) has been used. Use HG Polish, Wax and Dirt Remover (HG Remover) to deep clean the floor annually and to renovate and clean very dirty floors. Coverage: 1 litre will be sufficient to wash a floor area of 20 m² approx. 20 times. 5 Litres Click here to see the complete HG range of Floor Cleaning Solutions. Click here to download Safety Data Sheet (pdf). Click here to save 10% and buy in case size   Price:    £25.88 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product
HG Hagesan Shine Restoring Tile Cleaner (Shine Cleaner) - Instructions Directions for use: Use Shine Restoring Tile Cleaner (Shine Cleaner) diluted: approx. 1 cup (100ml) to 1 bucket (10 litre) of water. Scrub or mop the floor as necessary. Smooth tiles can usually be mopped clean with Shine Restoring Tile Cleaner (Shine Cleaner) but it may be advisable to scrub tiles with a rustic or textured surface. Wring the mop out regularly in a separate bucket of clean water to avoid soiling the detergent solution. The water can be changed as it becomes dirty. This saves wasting the clean solution. Do not rinse the floor after cleaning or you will remove the shine compounds left by Shine Restoring Tile Cleaner (Shine Cleaner). Allow the floor to dry naturally. Use HG Polish, Wax and Dirt Remover (HG Remover) to deep clean the floor annually and to renovate and clean very dirty floors. Coverage: 1 litre of HG Superfloor Shine Cleaner will be sufficient to wash a floor area of 20 m² approx. 20 times.

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here