HG Hagesan Stain Protector Ref: HG334 Use HG Hagesan Stain Protector on unglazed ceramic tiles, porcelain, granite, marble and natural stone. HG Stain Protector provides protection against almost all water-based spillages - such as those made by wine, cola, etc. and against oily spots and general contamination. Even porous surfaces are protected deep into their pores. Therefore HG Stain Protector is perfect for use on heavily used areas, for example in lounges, kitchens, bathrooms and more. The surface to be treated must be perfectly clean and dry. Use HG Polish, Wax and Dirt Remover (HG Remover) to strip old ceramic tiles, granite and slate floors prior to treatment, or HG Marble Stripper on marble, limestone or other calcareous natural stone. HG Quick Porcelain Cleaner should be used on unglazed floor tiles, such as unpolished stonewear or porcelain. HG Stain Protector is applied neat. Apply liberally with a Mohair Paint Roller. * Please note: HG Stain Protector is impervious to virtually everything - so once applied it is permanent. As it may alter the way light reflects of the tile it is recommended to apply to a test tile. Coverage: Approx.100 m² per litre per layer. 1 Litre Click here to download Safety Data Sheet (pdf). Click here to save 10% and buy in case size   Price:    £19.74 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product Related products: 1. HG Hagesan Power Cleaner (Polish Wax and Dirt Remover) (Ref: HGREMOVER)
HG Hagesan Stain Protector - Instructions Directions for Use: The surface to be treated must be perfectly clean and dry. Use HG Polish, Wax and Dirt Remover (HG Remover) to strip old ceramic tiles, granite and slate floors prior to treatment, or HG Marble Stripper on marble, limestone or other calcareous natural stone. HG Quick Porcelain Cleaner should be used on unglazed floor tiles, such as unpolished stonewear or porcelain. HG Stain Protector is applied neat. Apply HG Stain Protector liberally with a Mohair Paint Roller or emulsion brush. On very porous surfaces, a second treatment of HG Stain Protector should be applied after approx. 2 hours. After 3 hours it is safe to walk over the surface. The surface is completely protected 12 hours after the final treatment. Coverage: Approx.100 m² per litre per layer. Maintenance: For regular maintenance cleaning use the appropiate cleaning products. eg. HG Quick Porcelain Cleaner, HG Marble Wash and Shine or HG Superfloor Shine Cleaner. Attention: Do Not apply HG Stain Protector to polished or glazed tiles.

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here