HG Hagesan Spot Stain Remover removes grease, fat, oil and other stubborn stains from a variety of surfaces such as quarry and terracotta floor tiles, brick and natural stone, etc.
HG Spot Stain Remover is very efficient at cleaning flagstones, paving slabs, concrete driveways and cement surfaces.
HG Spot Stain Remover is also suitable for removing residues of epoxy resin grout.
We recommend using our Scrubbing Brush with HG Spot Stain Remover.
To remove spots: HG Spot Stain Cleaner should be mixed by shaking the bottle before use. HG Spot Stain Remover can be used concentrated on areas of severe staining, otherwise dilute 1:5 with (preferably warm) water, apply and spread over the areas to be cleaned.
Use a scrubbing pad or brush. Scrub and leave to work for 5-10 minutes. When staining has been loosened, mop up and rinse off thoroughly with plenty of clean water. On very absorbant surfaces the treatment with HG Spot Stain Remover may need to be repeated.
Prolonged work with scrubbing pads will be necessary to remove epoxy grout residues.
Rinse off with plenty of water.
Attention: Wax or polish treatments will need to be re-applied following the use of HG Spot Stain Remover. Avoid splashes onto paint or varnished surfaces. Rinse off spilled product directly with plenty of water. Allow for good ventilation when using in enclosed areas.
Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here