HG Hagesan Mould Remover Foam Spray 500ml Ref: HG260FOAM HG Hagesan Mould Remover Foam Spray immediately destroys mould from damp places - inside and outside. The unique foam formula has a less penetrating odour, can be more easily aimed at the mould and is less likely to splash. The foam formula stays in place longer, making it more effective for a longer period of time. For cleaning tile and plaster walls (also suitable for marble and other natural stone) for joints in the bathroom, shower, toilet, kitchen, cellar, basement, sauna, swimming pool, garage and shed. Also cleans facade, balcony, planters, garden statues, etc. Size: 500ml   Price:    £6.11 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product
HG Hagesan Mould Remover Foam Spray - Instructios For Use. Directions for use: Remove the locking clip before use. If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you reuse the bottle. Before resuing the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. The product has a bleaching effect, so in case of doubt, start by testing it in an unobtrusive place. Do not remove mould first. Press the nozzle at the front side and turn a quarter. Spray the surface from a distance of 3-5 cm. In case of persistent dirt, spray again after 30 minutes and leave it to work for another 30 minutes. Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. sillicone sealant) after approx 30 minutes and spray again. Turn the nozzle backwards a quarter turn after use to the blocking position. For cleaning large surface areas with green deposits, we recommend HG "Algae and mould remover" Dosage: 2-3 m sq wall surface, 6-8 m sq tile joints. Attention: We recommend you ventilate well during use and wear rubber/plastic gloves. Prevent splashing on your clothing, gloss paint or slats. Rinse immediately with water on contact. Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We do not recommend using this product on ceilings with decorative plaster.

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here