Case of 6 x HG Hagesan Terracotta Shine Seal 1 Litre Ref: TCSHNESEALcase Case of HG Terracotta Shine Seal (Product 84) HG Hagesan Terracotta Shine Seal is an alternative to HG Terracotta Wax which gives Terracotta tiles a shining finish and protects the floor against the deep penetration of dirt and stains. The coating of HG Terracotta Shine Seal is very durable, easy to maintain (does not require regular buffing) and is impervious to most household chemicals. If the floor is porous this will need to be treated first with HG Impregnator to reduce its porosity and to ensure a good base to sustain the HG Terracotta Shine Seal. For regular maintenance cleaning of a floor treated with HG Terracotta Shine Seal use HG Terracotta Clean and Shine which both cleans and extends the life of the finish. HG Terracotta Shine Seal is easy to remove when necessary with HG Terracotta Remover. Coverage: 20-25 m² per litre. 6 x 1 Litre Also available individually Click Here Click here to see the complete HG Terracotta Care Range. Click here to download Safety Data Sheet (pdf).   Price:    £69.71 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product
HG Hagesan Terracotta Shine Seal Usage Instructions Directions for use: If the floor is porous this will need to be treated with HG Impregnator to reduce its porosity and to ensure a good base to sustain the HG Terracotta Shine Seal. Apply HG Terracotta Shine Seal only on clean, dry floors. If necessary clean off any grout film from new floors with HG Extra or HG Limex. Any underfloor heating should be switched off. Use HG Terracotta Shine Seal neat. Do not HG Terracotta Shine Seal pour directly onto the floor. Apply HG Terracotta Shine Seal with either a Non-Fluffy Cloth (perhaps wrapped around a floor mop), a Mohair Paint Roller. (not foam or wool) or with a wax-applicator moistened with HG Terracotta Shine Seal. Apply thinly and evenly in one direction. Several thinly applied coats are better than one thick coat. Allow HG Terracotta Shine Seal to dry for at least 45 minutes before applying the next coat to achieve a smooth shining finish over the whole floor. The floor can be walked on after approximately 3 hours. After 3 days HG Terracotta Shine Seal is completely hardened. The stain resistance of the floor can also be increased by applying additional coats of HG Terracotta Shine Seal. Maintenance: For regular maintenance cleaning of the treated floor use HG Terracotta Clean and Shine which both cleans and extends the life of the finish. Old worn coatings can be removed when finally necessary with HG Terracotta Remover without stripping the HG Impregnator underneath. Clean tools afterwards with water. Coverage: 20-25 m² per litre. Attention: Do not shake bottle or stir before use.
	Non-Fluffy Cloths Ref: 760872 Non-Fluffy Cloths Non-Fluffy 100% Cotton Tea Cloths. These are pre-washed (and so ready to use) and are ideal for the application of a number of HG Hagesan Products. When using these cloths we recommed using our 7 inch Roller Tray to hold the product. Pack of 2. Colour may vary. Size approx. 23 x 14.5in  Price:    £2.14 Including  VAT at 20% Viewing this content on a mobile device? Tap here to call us and order.
	Quantity:   Enter e-mail address to tell a friend about this product

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here